Fatty acid
Resinoline BD 2
Tall oil fatty acids, produced from the distillation of Crude Tall Oil (a byproduct of the pulp industry).
Resinoline BD 2 shows a low rosin content and is mainly composed by C18 fatty acids. It displays a mono carboxylic acid functionality particularly recommended in chemical synthesis.
Applications
- Alkyd resins, polyester resins, industrial oils, soaps, drilling fluids
- Surfactants, bitumen emulsions
- Fuel additives. Lubricants
Acid number (mg KOH/g) (mg /g)
192
Gardner color (Gardn)
Max 5.5
Resin acids content (%)
Max 2
Density at 20°C (g / ml)
0.901
Iodine index (g I/100g) (gI / 100g)
130
DRT analytical methods are available on request
Oleic acid (%)
47
Linoleic acid (%)
34
Palmitic and stearic acids (%)
2
Unsaponifiable (%)
2
Bio-based content (%)
(measured by ASTM D6866-21 Method B)
100
CAS
61790-12-3
EINECS
263-107-3
HANDLING AND STORAGE
Store under cover and at temperature between 15 and 30°C maximum with a recommended storage and handling temperature at around 20°C. Containers must be kept sealed under cool, dry conditions. When stored in bulk, nitrogen blanketing is recommended.
If BD 2 is subjected to cold temperatures during storage or transportation it may become cloudy or show some precipitation. This is a normal characteristic and not a defect. If affected, the material should be gently heated to max. 30 °C and circulated or agitated to restore the clear and bright condition. Rotating sealed stock every 6 months would be best practice.
STABILITY
Stability of about 18 months in standard conditions
PACKAGING
Bulk
Drums and IBC available via our distributors
CUSTOMS TARIFF
3823130090
The data herein are based on our knowledge about above product. They are without conditions or warranties, expressed or implied regarding the uses of the product. DRT analytical methods are available on request.
